Slides and Awnings
RV Slide Out and Awning Repair for Hacienda Heights Owners, Handled In One Building
RV slide out and awning repair covers the two assemblies bolted through your sidewall: the slide room with its mechanism and seals, and the patio awning or topper above it. Both run on Lippert, Carefree, Dometic and Solera hardware, both fail as a geometry problem before they fail as a part, and both are diagnosed under power in a bay.
Slides and awnings sit in one program here for an engineering reason, not a filing one. They come out of the same parts channel and they are diagnosed along the same path. Lippert supplies the slide mechanism and, as Solera, the awning. Carefree of Colorado and Dometic supply patio awnings and the slide toppers that mount into the same extruded wall rail as those awnings. The result is that one coach can carry a Lippert room, a Solera topper and a Carefree patio arm, and the roller tube families, poly cord grooves, rail extrusions, 12 volt motors and controller logic overlap across all three. A shop that stocks and reads one of those catalogs is already reading the others.
The diagnosis path is shared too, and that matters more than the parts. On both systems the complaint the owner brings in is downstream of geometry. A room that sits a quarter inch out of square shears its wiper seal on every cycle, and the owner reports a leak. An awning with a bent lateral arm no longer rolls the fabric evenly on the tube, and the fabric tears in the same place every season. In both cases replacing the visible part restores the symptom in a year. So we measure the opening, cycle the assembly and read the travel before anyone quotes a seal kit or a fabric. That is the seal and mechanism path, and it runs identically whether the moving thing is a room or a canopy.
Which is also why none of this happens anywhere but a bay. A slide has to be cycled under power, repeatedly, on level ground, with someone reading the inboard travel while someone else reads the outboard, and with the room supported on stands the moment a motor or a rail comes off. An awning fabric swap means de-tensioning a spring loaded roller tube that is holding real energy. Neither is driveway work at any price, and we will not pretend otherwise. The RV systems estimate that scopes this work is $150, credited against an authorized repair, and where a controller or motor circuit has to be read electrically it moves to the in depth diagnostic at one hour of $285, also credited.
Every job on this list is performed at our Yorba Linda facility. Hacienda Heights owners are 18.4 miles out, which is 24 to 38 minutes on SR-60 west to Fullerton Rd. If your room is stuck in the extended position, say so at intake: a coach with a room out is over width, and we will talk through securing and travel before you move it.
At a glance
$400 to $8,500 plus
2 to 35 plus hours of labor across this program
Pick the work
What we do under Slides and Awnings
Every page below carries its own price band, hour band and parts lead time. Numbers are published rather than quoted on the phone, because a phone number is a guess.
Published numbers
Price and hour bands for Slides and Awnings
| Service | Price band | Labor | Turnaround | Estimate |
|---|---|---|---|---|
| Slide Out Mechanism Repair | $500 to $8,500 plus | 3 to 35 plus hours | Systems and electrical | RV systems estimate, $150 |
| Slide Out Seal and Gasket Replacement | $400 to $3,000 | 2 to 14 hours | Light cosmetic | RV systems estimate, $150 |
| Slide Room Structural Repair | $1,500 to $7,500 | 10 to 35 hours | Structural | Collision teardown estimate, 1 hour at $210 |
| Slide Out Motor and Gear Repair | $500 to $5,500 | 3 to 24 hours | Systems and electrical | In depth diagnostic, 1 hour at $285 |
| Schwintek Slide Repair | $750 to $7,500 | 4 to 30 hours | Systems and electrical | In depth diagnostic, 1 hour at $285 |
| Slide Out Topper Replacement | $450 to $1,800 | 3 to 8 hours | Light cosmetic | RV systems estimate, $150 |
| Awning Fabric Replacement | $400 to $2,500 | 2 to 10 hours | Light cosmetic | RV systems estimate, $150 |
| Awning Arm and Mechanism Repair | $500 to $3,500 | 3 to 14 hours | Systems and electrical | RV systems estimate, $150 |
| Awning Motor and Sensor Repair | $500 to $3,500 | 3 to 14 hours | Systems and electrical | In depth diagnostic, 1 hour at $285 |
| Full Awning Replacement | $900 to $5,500 | 5 to 22 hours | Systems and electrical | RV systems estimate, $150 |
Bands marked plus are open ended because the scope genuinely varies that far. Every estimate tier listed is credited against an authorized repair. See estimate policy and posted labor rates.
The rest of the list
Other Slides and Awnings line items and where they are covered
These are line items from the master service list that do not carry their own page, because a page with nothing distinct to say about it is thin content. Each one is linked to the page that actually covers the work.
Slide out seal and weatherproofing work
- Slide-out seal replacement and adjustment
- Slide-out weather sealing and threshold adjustments
- Slide-out seal lubrication and adjustment
- Thermal wrap for slide-out seals
- Slide room alignment and weatherproofing
- Slide-out topper and weather guard installation
- Slide-out skirting installation and weatherproofing
- Slide-out roof cap repair and replacement
- Heavy duty slide-out hinge protection
- Slide-out sidewall seal maintenance
Awning, canopy and exterior mount upgrades
- Roof-mounted awnings and canopy upgrades
- Custom roof ladder installations
- Custom roof rack installation
- Roof-mounted cargo box installations
- Custom roof top tents and platforms
- Roof ventilation system upgrades
- Solar-powered ventilation upgrades
- Solar panel system installation
- Satellite dish installation
- Roof strengthening and insulation upgrades
- Enhanced skylight and roof hatch upgrades
Where slide and awning work crosses into other programs
- Slide face delamination and laminate separation
- Slide room roof membrane and sealant renewal
- Water damage behind a failed slide seal
- Finish flooring disturbed for slide rail access
- Sidewall repair where an awning bracket has torn through
- Leveling system faults that present as a slide fault
- Moisture and leak detection before a seal quote
- Insurance billed slide and awning damage
- Priced estimate tiers and how credits are applied
Not this, that
Adjacent programs
Related work that belongs on a different page. Sending you to the right one first is faster than writing an estimate for the wrong one.
Roof Work
Membrane, decking, vents, skylights and reseal work on rubber, TPO, fiberglass and aluminum roofs.
Fiberglass
Delamination, crack, cap, panel and soft spot repair on laminated fiberglass sidewalls, caps and skins.
Onboard Systems
Diagnosis and repair of 12 volt, 120 volt, generator, plumbing, LP, climate, leveling and electronics systems.
Questions
Slides and Awnings questions we answer at the counter
Why are slide outs and awnings handled as one program rather than two?
Because they share a parts channel and a diagnosis path. Lippert supplies slide mechanisms and, as Solera, awnings. Carefree of Colorado and Dometic supply patio awnings and the slide toppers that mount into the same wall rail. Roller tubes, rail extrusions, 12 volt motors and controller logic overlap across all of them, and both systems are diagnosed by measuring geometry before replacing a part.
What does it cost to have a slide or awning problem properly scoped?
The RV systems estimate is $150 and it is credited against an authorized repair. Where the fault is electrical, meaning a controller, a motor circuit or a sensor, it moves to the in depth diagnostic at one hour of $285, also credited. Slide room structural work is scoped on a teardown estimate at one hour of the body rate of $210, credited the same way.
Can the work happen where the coach is parked in Hacienda Heights?
No, and the reason is mechanical rather than policy. A slide has to be cycled under power, repeatedly, on level ground, with the room supported on stands the moment a motor or rail comes off. An awning fabric change means de-tensioning a spring loaded roller tube holding real stored energy. Both need a bay. The drive is 18.4 miles, 24 to 38 minutes on SR-60 west to Fullerton Rd.
How do I get the coach there if the room is stuck extended?
Tell us at intake and we will talk it through before you move anything. An extended room makes the coach over width, so the conversation covers securing the room, whether a partial manual retraction is possible on your system, and which route makes sense. What we will not do is have you find out about the clearance problem on an on-ramp.
Which of these repairs does insurance usually pay for?
Sudden events. A room damaged in a collision or by an obstacle, an awning taken by wind, an assembly destroyed by driving away extended: those are typically covered. Gear track wear, seal compression set and fabric UV degradation are normally treated as maintenance. We bill direct with every major carrier and document the cause either way so an adjuster can see the distinction.
Bring your slides and awnings problem to the shop
We are 18.4 miles from Hacienda Heights, 24 to 38 minutes via SR-60 west to Fullerton Rd, then south to La Palma Ave. Every job is performed at the Yorba Linda facility.