# Fleet Body Work and Downtime Management How box truck dock damage gets triaged, how units get sequenced so a fleet keeps running, and how municipal and county purchase orders change the documentation we produce. ## Dock Damage Repeats Loading dock damage repeats across every fleet. Rear frame and bumper deformation from backing into a dock plate at an angle. Corner post and rear header damage from a door edge catching. Roll up door tracks bent so the door binds in the top third of travel. Rear sill and threshold plate crushing. Side panel scrapes from tight yard geometry. Because it repeats, it can be triaged rather than treated as a surprise, and that is what keeps a fleet's body spend predictable from quarter to quarter. Triage sorts each unit into three buckets. Safe to run with cosmetic damage, which schedules into a slow week. Functional but degrading, such as a door that binds or a rear sill that no longer seats a dock plate squarely, which schedules within days because it is about to become downtime. And not safe to run, meaning structural deformation, a compromised rear frame member, or a lift gate that will not hold position. We put the bucket in writing on each estimate so a fleet manager can plan rather than react. ## Sequencing to Protect Uptime A fleet does not need every unit fixed at once. It needs a working count maintained. So the sequencing conversation comes before the repair conversation. We take the list, apply turnaround tiers to each unit, and build a schedule that never has more units in the building than the fleet can spare. Light cosmetic body work is 2 to 5 business days. Moderate body is 1 to 3 weeks. Structural repair is 3 to 8 weeks. Upfit and equipment fabrication is 2 to 8 weeks. Parts availability drives sequencing more than bay space does. A box body panel, a roll up door section or a specific rear frame component often carries a lead time, so the right move is to order parts for units three through six while unit one is in the building, and bring each unit in only when its parts are on the shelf. That single change routinely cuts a fleet's total downtime compared to bringing everything in at once and waiting. It requires a real parts commitment up front. Everything happens in the building. We do not perform repairs at a customer yard or a customer facility, so units are delivered to 23281 La Palma Ave in Yorba Linda and picked up there. For fleets based around Hacienda Heights and the wider San Gabriel Valley that is a short run, 18.4 miles on SR-60 west to Fullerton Rd, or SR-60 east to SR-57 south to SR-91 east, and drivers routinely drop a unit and ride back with a second driver in one trip. ## Purchase Orders and Public Billing Commercial and public sector billing runs on documentation. Private fleets typically issue a purchase order against a written estimate, and the PO number goes on every document including the invoice, the parts list and any supplement. County and municipal purchase orders add requirements: a specific requisition format, itemized labor at published rates rather than a lump sum, separate line items for parts with tax shown, and often a not to exceed amount that cannot be exceeded without a formal change order approved before the work happens. That last point is where fleet files go wrong. If hidden damage appears after teardown on a unit under a not to exceed purchase order, work stops and a change order goes to the purchasing contact before a single additional hour is billed. Our estimates itemize to the published rates for exactly this reason: body and paint at $210 per hour, mechanical and electrical at $260, diagnostics at $285 with a one hour minimum, paint supplies at $55 per paint hour, body supplies at $5 per body hour, and 7.75 percent tax on parts and materials only. ## Lift Gates and Upfit Equipment work is a large share of fleet volume. Lift gate repair and replacement, including mounting structure repair where a gate has been overloaded or struck. Shelving, drawer packages and interior partition installation in service vans and Sprinter chassis. Ladder racks, roof racks and pipe carriers. Rear door and roll up door replacement. Toolbox and compartment installation with proper structural backing. Body and equipment mounted lighting. Each of these is an install and fabrication job with a defined structural attachment method, documented on the plan. Be clear on scope. Our fleet work is in shop body, paint, structural repair and equipment installation. We do not perform engine work, drivetrain repair, transmission work, DOT inspections or emissions testing, and we do not offer telematics, driver training or fleet consulting. Structural welding on frames and mounting structures is performed by a certified welder, because a lift gate mount or a repaired rear frame member is a load path. To open a fleet account or schedule a unit for triage at the shop, call OCRV Center at (949) 799-3387. --- Source: https://ocrv.club/guides/commercial-fleet-body-work-and-downtime-management OCRV Center, 23281 La Palma Ave, Yorba Linda, CA 92887 Phone (949) 799-3387. Email info@ocrvcenter.com. Serving Hacienda Heights and the surrounding area. 18.4 miles, 24 to 38 minutes via SR-60 west to Fullerton Rd, then south to La Palma Ave. In shop work only. All estimates are priced and credited against an authorized repair.